Detailed Product Description

corn flour milling line
corn flour milling line technological design is reasonable and adjusts vivid, strong adaptability,advance equipments, high automation degree, credibility function, economy and practicality, good cleaing part. Choose the most popular dry corn cleaning methods to process the corn to produce non-pollution corn flour. The stability of the corn flour milling line is strong, the function is credibility, economy and practicality, the quality of the corn flour is stable, index is forerunner.
1) The corn storage of corn flour milling line
In the corn flour milling factory, the rough grain enter into the first vibrating sieve through the elevator by the manpower( also the transportation can use the machine), then wipe off the big and small size impurity, to remove the stones through the destoner.At last to go into the rough grains barn by pound. Each barn would be provided the corn milling flour workshop to produce more than 2 days.
2) The cleaning of corn flour milling line
The corn cleaning:The technics of drying clean methods adopted sieves, stoner,  magnetism, damper, peeling.It is choose single circle absorbing separation machine to separate the embryo in the corn.The dampering work that before peeling it is use the vibrating damper machine, to guarantee the water quantity in accordance with the parameter of water damper.To separate the embryo and the husk by peeling machine, to ensure the quality of the main product and the by-products.
3) The milling craft of the corn flour milling line
The milling craft adopts 3B,3R to process the corn, the milling methods adopted grinding the corn subdividely, to guarantee the craft effect that choose the most advanced corn milling machine and sieve machine, guaranteeing its craft result, adopting 2 series energy transporting system, one a low pressure absorbing system, this craft can produce 3 kinds of corn products at the same time, that 1#,2#,3# corn flour and have abundant corn embryo flour, corn barn and pastry flour.
4). Craft effect guarantee:
a)Guarantee for the corn cleaning
After use the cleaning equipments, the cleaning corn should reach the following specification in the 1B:
The impurity content of the dust should not over 0.3%
Among them, the sand stone content should not over 0.02%
b) Tailings
After sieving,in each kilogram of crushed stones, the plump corn is not over 100 grains.
After careful sieving, in the wasting things, the good corn is not over 0.01%
After careless sieving, in the wasting things, the good corn is not over 0.01%
In the tailings, the plump corn shouldn't over 0.01%
5). Dust and noise
A. Dust:
For keeping dust from float in the sky, we adopted the following measure:
a) The work shop close with the office, besides choose the good closeness machine in the work shop, and adopted the absorb dust measur for each set machines, especially adopt the strongly absorbing machine to the cleaning part that easily produce the dust.
b) Adopted second grade dusting system to the wind net system that have density dust, each wind nets that provid with TBLM series cylinder low-pressure impulse dust catcher, can filtrate the very small dust, to guarantee the outdoors exhausting density lower to 150 mg/m3, the dust in the work shop( not include to packing work shop)lower to 10 mg/ m3.
c) To attain the above index, each cubic meter air enter the work shop from the exterior shouldn't over 5 mgs of dust.
B. controlling for the noise:
In order to lower the work shop's noise possibly, we adopted following measure:
The seller should arrange all layouts of equipments, that to isolate the noise come from the normal operation work area.
Choose most popular, good function, and lower noise machine of China in designing.
Use the shock absorber to reduce to vibrate the noise.
To reduce the air compressor's noise, it is adopted the isolation booth to prevent the noise. To arrange the blower should avoid the main operation floor.
As slip the bear material in the slip cube, the noise will be lower.
As the main controlling room fully separate with the work shop, so the noise will lower than 70 decibels.
As the main controlling room adopt the automatic controlling, so inside the work shop can attain no man operation, only need a little amount of staff members to check the machines operation.
The seller will guarantee to attain 85( dB), except the blower, and the milling machine.